An open dishwasher in a US kitchen with a shallow top tray of utensils and spatulas pulled out above two loaded racks of plates and glasses.

Choosing and comparing

Dishwasher third rack: what fits, and what the lower racks lose

A dishwasher third rack is a shallow top tray for utensils, spatulas and small items that frees the silverware basket and a lot of room below. It is worth it for large households and heavy cooks, but it lowers the upper rack's clearance, so tall glasses and bowls fit less well and loading takes more care.

(844) 430-4286

Mon–Sat, 8am–8pm

  • Which kind fits your kitchen
  • 5-minute read
  • Across every type and make

Book a visit

Three short steps, about a minute.

or call (844) 430-4286

At a
glance.

A third rack adds a shallow tray at the top of the tub for utensils and small items, and it is one of the most promoted features on new dishwashers. The trade is height, and you pay it in the two racks below.

Read the whole guide

What it isa shallow top tray on its own rails

for flat utensils and small items

Tradeless headroom for the upper rack

tall glasses may not fit

Washdepends on the model's spray design

check the manual

Fit testmeasure your tallest glass and mug

before choosing

What is a dishwasher third rack?

A dishwasher third rack is a flat, shallow tray that slides along rails near the top of the tub, above the upper rack. It is made for utensils, serving spoons, spatulas, whisks and other thin or small items that would otherwise ride in the silverware basket or lie across the upper rack.

It is not the same as a fold-down tine row or a cutlery tray that sits on the upper rack, though some brands use similar names. A true third rack has its own rails, and the model's design decides how water reaches it.

How it is washed

Different makes spray the tray differently: a dedicated top spray arm, nozzles in the tub wall, or water that is routed from the upper arm. The manual for your model says which. Where the spray is weaker, long or nested items can come out less clean than on the lower racks, so the tray is best for flat, open shapes.

What does a third rack actually hold?

It holds the items that are awkward everywhere else, laid flat and not touching. That frees the silverware basket for forks and spoons, which wash best when separated, and clears space on the upper rack for cups.

  • Spatulas, ladles and serving spoons
  • Whisks and tongs with a flat profile
  • Measuring spoons and cups
  • Small lids and flat kids' items
  • Long knives in models that allow it, laid flat as the manual says

What does not belong on it

Knives not meant for a dishwasher, heavy items, and anything that traps water in a cup shape, unless the tray is a deeper style the manual says takes small cups. Items that tip or shift can block the tray's movement or the spray arm below, and the rack is rated for light loads only.

A close view of the shallow top tray's side rails and the upper rack below it, showing the small gap between a tall wine glass and the tray above.
A close view of the shallow top tray's side rails and the upper rack below it, showing the small gap between a tall wine glass and the tray above.

What do the lower racks lose?

Height. The tray sits in the space that used to belong to the upper rack's headroom, so the upper rack is lower, and the usable height under the tray shrinks.

What the extra tray gives and takes.
SpaceWith a third rackWithout
Utensil storageDedicated flat trayBasket on the door or rack
Upper rack headroomReduced, tall stemware may hit the trayMore room for tall glasses
Lower rackOften unchangedOften unchanged
Spray coverage of the upper rackShared with the trayFull

Check your tallest items before you decide: a tall travel mug, a wine glass with a long stem, a tall pitcher. Measure each one and compare it with the rack clearance the manual lists with the tray in place. A dishwasher that fits your pots and pans on the bottom but not your glasses on top is a worse fit than one without the tray.

How does a third rack change loading and drying?

Loading becomes a routine of flat items up top, cups on the upper rack, plates and bowls below. Once the utensils are in the tray, the silverware basket can carry forks and spoons only, which tends to leave them cleaner because they are not nested.

Drying can change, too. A top tray over the upper rack can block steam from reaching the upper rack, and plastic items in the tray hold water. If dishes on the top rack stay wet, read why dishes come out dirty for load and spray causes, and hard water and rinse aid for the drying side, and see the dishwasher not drying problem.

Keeping the spray free

A tray that is overloaded or has an item hanging down can stop a lower arm from turning, which leaves a patch of dishes dirty. Spin each arm by hand after loading. If the arms are fine and dishes still come out dirty, a spray path problem is more likely, and a diagnostic visit will check the circulation pump and arms. For the filter and spray parts you can clean yourself, see filter and spray arm cleaning.

Is a third rack worth choosing a model for?

It is worth it if you own many flat utensils, cook a lot, or run a household where the silverware basket is always overloaded. It is not worth it if you mostly use tall glasses and large bowls, or if you want the roomiest possible upper rack.

Questions to ask in the showroom or against the manual:

  1. How high is the upper rack's clearance with the tray in place?
  2. Can the tray be removed, and does the upper rack go higher without it?
  3. Is the tray sprayed from above, or does it depend on water from the arm below?
  4. Does the model come in a size and style that fits your opening?

The same tray feature appears across built-in and some panel-ready models. See the panel-ready dishwashers guide if your cabinet uses a front panel, and the built-in, drawer or compact guide if the choice is wider than rack layout.

What a third rack means for repairs

The extra tray adds rails, rollers and sometimes a spray arm and its feed. Rollers wear and rails jam, which is a small repair, but a second spray source adds a path that can clog. The pump that feeds it is the wash motor and circulation repair service area. When a machine with the feature is aging, the repair or replace a dishwasher guide helps weigh it, and the built-in dishwasher repair page lists what we service.

A family unloading clean plates from an open dishwasher together in a bright contemporary kitchen, a child handing a plate to a parent
For the heart of your home.

Questions
owners ask.

Does a third rack clean as well as the lower racks?
Often it does for flat, open items, but it depends on the model's spray design. Models with a dedicated spray source above the tray clean it well, while those that borrow water from another arm can leave nested items less clean. The manual for the model shows how the tray is sprayed.
Can I take a third rack out?
On many models yes: the tray slides off its rails, and the upper rack can then be set higher. Check your manual for how, since removal methods differ and some models limit the height settings with the tray removed.
Will a third rack fit in a smaller dishwasher?
Many compact or drawer models do not offer one, because the tub is too short. Widths and heights vary, so look at the model's interior height in the manual rather than the feature list alone. The size and type guides on this site help narrow the choice.
Why are my utensils still wet on the third rack?
Flat items lying on a tray hold water in pockets and against each other, and steam may not reach the top as well. Tilt spoons so they drain, space them apart and open the door a little at the end of the cycle to let the steam out.

The problems
behind it.

Each has a page of its own: what it usually means and the causes in the order worth checking.

All 17 problems

Back to your everyday

Read it and still not sure?

Book with what you checked and the model number, and the technician starts where the guide stopped.

(844) 430-4286 Schedule a repair