Gaggenau dishwasher
showing E:3200
E:3200, or a lit water supply indicator, means not enough water is coming in.
Mon–Sat, 8am–8pm
- Water supply
- Fill and water valve repair
- Source: Gaggenau
Book a visit
Three short steps, about a minute.
or call (844) 430-4286
Loading appointment form…
The appointment form couldn’t load. Please try again.
What E:3200
actually means.
E:3200, or a lit water supply indicator, means not enough water is coming in. The manual's causes are a kinked hose, a closed or scaled faucet, and a blocked filter in the supply or AquaStop hose connection.
Gaggenau dishwasher display
What to do when E:3200 shows on the dishwasherKind of codeWater supply
Not enough water arrived, or it arrived too slowly. The supply valve under the sink and the inlet screen are checked before the fill valve itself.
Usually leads toFill and water valve repair
A dishwasher that will not fill, fills too little, or keeps filling, traced through the valve, the float and the supply.
Shows up asDishwasher Not Filling With Water
The cycle starts and hums, but little or no water comes into the tub.
MakeGaggenau
Top-tier built-in dishwashers from the BSH family, often installed fully integrated.
SourceGaggenau DF480700 Use and Care Manual (en-us), Troubleshooting (media3.gaggenau.com PDF)
Gaggenau DF480700, where the manual pairs the number with a water supply indicator.
Before you book,
in this order.
Each step comes from Gaggenau's own guidance for E:3200 on its dishwashers. Follow it to the end: the last card says whether this is a visit.
Make sure the faucet is on and the inlet hose runs without kinks.
With the power off and the faucet closed, unscrew the water connection, take the filter out of the supply hose, clean it and refit it.
Screw the connection back on and check it for leaks before restoring power.
Book a visit if the flow is still short; the manual asks for at least 10 liters a minute.
Still there?
It usually turns into fill and water valve repair. Book with the code and the model number.
What not to do
E:3200 does not mean water is leaking; on this model the leak signal is E:3000.
What you may
notice with it.
The dishwasher problems E:3200 tends to arrive with. Answer these at the dishwasher before anyone is booked.
All problems
Where E:3200 usually leads
Fill and water valve repair.
Read these
before the visit.
Short guides that make the call quicker and the diagnosis cheaper.
All guidesGaggenau
dishwashers.
Top-tier built-in dishwashers from the BSH family, often installed fully integrated.
Gaggenau dishwasher repair
In Gaggenau's own words
Filters in the water connection of the supply or AquaStop hose are blocked.
Every code on this site is taken from the manufacturer's documentation, never from a forum or a parts listing. Gaggenau DF480700, where the manual pairs the number with a water supply indicator.
Gaggenau E:3200 dishwasher repair,
where we come out.
The same visit in every metro below: the code, the model number, and a diagnosis before any part is ordered.
All service areasTampa BayFL · 31 areas
Miami / South FloridaFL · 47 areas
New York MetroNY · 75 areas
HoustonTX · 36 areas
ChicagoIL · 50 areas
Los AngelesCA · 95 areas
San DiegoCA · 31 areas
Questions
about E:3200.
Can I clear E:3200 myself?
Where is the filter Gaggenau mentions for E:3200?
How much flow does a Gaggenau need to avoid E:3200?
Back to your everyday
Still showing E:3200?
Book with the characters exactly as shown, the full model number, and whether any water is on the floor — for a code, that is where the diagnosis begins.