The bottom of a dishwasher tub with the lower rack removed, cloudy water standing around the cylindrical filter and the spray arm above it.

Bosch dishwasher
showing E24

E24 says water is not leaving the dishwasher the way it should.

(844) 430-4286

Mon–Sat, 8am–8pm

  • Drain
  • Drain and pump repair
  • Source: Bosch

Book a visit

Three short steps, about a minute.

or call (844) 430-4286

Before you book,
in this order.

Each step comes from Bosch's own guidance for E24 on its dishwashers. Follow it to the end: the last card says whether this is a visit.

01

Switch the dishwasher off, take out the filter and scoop out the standing water.

02

Remove the drain pump cover, clear anything caught behind it, and press it back until it clicks.

03

Check the drain hose under the sink for a kink or a sharp bend, and clean the air gap if there is one.

04

If E24 is back after a rinse cycle, book a visit so the pump and the drain path can be tested.

Still there?

It usually turns into drain and pump repair. Book with the code and the model number.

What not to do

A kinked hose or a blocked air gap is plumbing rather than a broken dishwasher, so E24 often clears without any part.

What you may
notice with it.

The dishwasher problems E24 tends to arrive with. Answer these at the dishwasher before anyone is booked.

All problems

Where E24 usually leads

Drain and pump repair.

Drain pump or drain hose · low.

In Bosch's own words

The drain pump hose is kinked or sharply bent.
Bosch US owner support: Dishwasher Error Codes

Every code on this site is taken from the manufacturer's documentation, never from a forum or a parts listing. Bosch dishwashers with a two-digit E code display. Bosch's page gives E25 the same list of checks.

Bosch E24 dishwasher repair,
where we come out.

The same visit in every metro below: the code, the model number, and a diagnosis before any part is ordered.

All service areas
A family unloading clean plates from an open dishwasher together in a bright contemporary kitchen, a child handing a plate to a parent
For the heart of your home.

Questions
about E24.

Can I clear E24 myself?
Switch the dishwasher off, take out the filter and scoop out the standing water. If it comes back, it needs a visit.
What should I check first for Bosch E24?
Bosch's own list starts with the drain pump cover, then a kinked or sharply bent drain hose, then debris in the air gap or hose. All three can be checked without tools beyond a towel and a bowl.
When does Bosch E24 call for a technician?
If the cover is seated, the hose is straight and the air gap is clean, yet a rinse cycle still ends with E24, book a visit. At that point the pump and the drain path need testing.

Back to your everyday

Still showing E24?

Book with the characters exactly as shown, the full model number, and whether any water is on the floor — for a code, that is where the diagnosis begins.

(844) 430-4286 Schedule a repair