The cabinet under a kitchen sink with its door open, a braided supply line running from a small shut-off valve toward the side of a dishwasher.

Bosch dishwasher
showing E18

E18 means the water level in the tub is too low, or water is not being pumped around properly.

(844) 430-4286

Mon–Sat, 8am–8pm

  • Water supply
  • Fill and water valve repair
  • Source: Bosch

Book a visit

Three short steps, about a minute.

or call (844) 430-4286

Before you book,
in this order.

Each step comes from Bosch's own guidance for E18 on its dishwashers. Follow it to the end: the last card says whether this is a visit.

01

Turn the supply valve fully on; a half-closed valve can starve the fill.

02

Check the inlet hose for kinks or damage.

03

If the supply is strong and the hose is sound, book a visit.

Still there?

It usually turns into fill and water valve repair. Book with the code and the model number.

What not to do

E18 does not automatically mean a part inside has failed; both of Bosch's checks are outside the machine.

What you may
notice with it.

The dishwasher problems E18 tends to arrive with. Answer these at the dishwasher before anyone is booked.

All problems

Where E18 usually leads

Fill and water valve repair.

Water inlet valve or float switch · low.

In Bosch's own words

The water level is too low, or water is not being pumped correctly.
Bosch US owner support: Dishwasher Error Codes Bosch US owner support: Dishwasher Error Codes

Every code on this site is taken from the manufacturer's documentation, never from a forum or a parts listing. Older-style two-digit readout on Bosch dishwashers; four-digit Bosch controls carry the same text for E3200.

Bosch E18 dishwasher repair,
where we come out.

The same visit in every metro below: the code, the model number, and a diagnosis before any part is ordered.

All service areas
A family unloading clean plates from an open dishwasher together in a bright contemporary kitchen, a child handing a plate to a parent
For the heart of your home.

Questions
about E18.

Can I clear E18 myself?
Turn the supply valve fully on; a half-closed valve can starve the fill. If it comes back, it needs a visit.
How much water flow does a Bosch need to avoid E18?
Bosch asks for a supply of about 10 liters per minute. A valve that is only partly open can fall short of that.
Does E18 mean my Bosch pump is broken?
Not necessarily; both checks Bosch gives for E18 are on the supply side, the valve and the inlet hose. Book a visit only after those are confirmed.

Back to your everyday

Still showing E18?

Book with the characters exactly as shown, the full model number, and whether any water is on the floor — for a code, that is where the diagnosis begins.

(844) 430-4286 Schedule a repair